Medium-strength removable film
HUCB・SBHF
The HUCB and SBHF types are manufactured by performing special adhesion processing on polyester film. Their heat resistance, adhesiveness, removability, etc. are excellent. These types are perfect as supports and protective film for thin film, foam, and other materials which are difficult to process, metal foil, etc.
Features
- Since it is easy to adhere and peel, workability is improved.
- Since the adhesive strength is high, floating and peeling during the work process are prevented.
- HUCB type can also adhere to foam and other materials with a rough surface.
- SBHF type features superior removability for stainless steel and other metals.
- SBHF type is extremely heat resistant.
Main applications
- As carrier film for urethane and other foam material processing.
- As protective film for material with a rough surface
- As protective film for metal plate processing
- As support and protective film for etching
- As carrier film for ceramic processing
Composition
※Base material thicknesses outside the standard specifications can also be supplied.
Standard specifications
Type | Base material(μm) | Adhesive layer(μm) | Adhesive hardness | Adhesive strength*N/cm (gf/25mm) | Ball tack No. | |
Adherend | ||||||
PET | SUS plate | |||||
HUCB | PET100 | 33 | Soft | 1.56~2.34(400~600) | 1.17~3.12(300~800) | 9 |
SBHF | PET75 | 25 | Hard | 1.17~2.73(300~700) | 2.73~4.68(700~1200) | 5 |
*Peeling angle: 180°, peeling speed: 300mm/min
※The above are measurement values and are not guaranteed.