Heat-resistant general removable adhesive film
HP・CT・ET・MK・ST・NT・HTA・GN・GS・SBHF・HUCB
PANAC’s removable adhesive film “PANAPROTECT®” is manufactured by performing special adhesive processing on polyester film, and features “heat resistance”, “adhesiveness”, and “removability”. It is perfect as support, protective film, or carrier film for materials which are difficult to process, such as thin film, etc. A full line of products from low to moderate adhesive force is offered, and have a record of achievements over a wide range of applications from electronic materials to optical parts. Please feel free to contact our salesman. He will propose a recommended product and practical experiments.
Features
- Workability is improved because it is easy to stick on and peel off.
- Adhesive does not remain so the opposing material is not contaminated.
- Types which can stick together even rough materials are available.
- The ET, HTA, ST, and CT types have especially high heat resistance.
- The HP and CT types are separator less.
Standard specifications
| Type | Adhesive layer(μm) | Adhesive strength* N/cm(gf/25mm) Adherend: PET film |
Adhesive strength comparison | Classification | Cushioning* | Composition |
| HP | 1 or less | 0.010～0.050（3～13） |  |
Optical protective film, printing matter protection | |
 |
| CT | 1 or less | 0．015～0.048（4～12） | Heat-resistant protective film | |||
| ET | 5 | 0.030（8） | High heat resistance removable |  |
||
| MK | 7 | 0.031（8） | Optical protective film | |||
| ST | 7 | 0.030～0.075（8～19） | Heat-resistant removable adhesive | |||
| 17 | 0.040～0.140（10～36） | Heat-resistant removable adhesive | ||||
| NT | 7 | 0.040～0.120（10～31） | General removable adhesive | |||
| 13 | 0.055～0.131（14～34） | General removable adhesive | ||||
| HTA | 6 | 0.060～0.180（15～46） | High heat resistance removable tack type | |||
| GN | 10 | 0.120～0.300（31～77） | General removable adhesive | |||
| GS | 13 | 0.350～1.200（90～308） | General removable adhesive | |||
| SBHF | 25 | 1.170～2.730（300～700） | Medium-strength protective film | |||
| HUCB | 33 | 1.560～2.340（400～600） | Medium-strength rough surface protective film |
*All kinds of base material thicknesses can be selected.
*This data summarizes the typical measurement values of each product. Please contact us for the measurement value by base material thickness.
*Peeling angle：180°peeling speed：300mm/min
※The above are measurement values and are not guaranteed.
Features of types
Main applications
- As support when etching thin FPC material
- As carrier film and protective film when processing ceramics
- As support when printing thin plastic film and metal foil
- As support when annealing thin plastic film
- As cover film during printing molding
- As support during multiple die cutting of thin sheet and film
- As protection and support during die cutting and coating of metal foil
- As support and carrier film during multiple die cutting
